Roller Brush

Mixing Instructions
The product should be mechanically stirred, slowly not vigorously, for at least 15 minutes and repeatedly while using product. To avoid skimming of the product it is important to reseal the container. DO NOT THIN THIS PRODUCT.

Application Instructions
Premium Liquid Rubber Roller/Brush Grade is roller/ brush applied. Allow each coat to cure 24 hours or dry to the touch before re-applying. Cure time depends on thickness, temperature and humidity levels. Surface should be dry & free of dust, dirt, grease & oils. When applying wear gloves and safety glasses. Do Not Over-Apply. Do not apply if rain is imminent (24 hrs).

Clean-up and Storage Instructions
Premium Liquid Rubber Roller/Brush Grade is a non-flammable liquid and does not present storage or transportation hazards. The product MUST be kept in heated storage if there is any danger of outside temperatures reaching below 40 F (5 C). For clean-up use mineral spits or baby oil.



Trowel Grade

Mixing Instructions
The product should be mechanically stirred, slowly not vigorously, for at least 20 minutes repeatedly while using product. To avoid skimming of the product it is important to reseal the container. DO NOT THIN THIS PRODUCT

Application Instructions
Premium Liquid Rubber Trowel Grade is trowel or brush applied. Allow each coat to cure 24 hours or dry to the touch before re-applying. Surface should be dry & free of dust, dirt, grease & oils. Cure time depends on thickness, temperature and humidity levels. When applying wear gloves and safety glasses. Do not apply if rain imminent (24hrs).

Clean-up and Storage Instructions
Premium Liquid Rubber Trowel Grade is a non-flammable liquid and does not present storage or transportation hazards. The product MUST be kept in heated storage if there is any danger of outside temperatures reaching below 40 F (5 C). For clean-up use baby oils or mineral spirits.



Ceramic TopCoat

Mixing Instructions
The Premium Coatings Ceramic TopCoat is a single component, ready to use product with little to no stirring required. To avoid skimming of the product it is important to reseal the container. DO NOT THIN THIS PRODUCT.

Application Instructions
TopCoat is roller, brush or spray applied. Allow each coat to dry before re-applying. Surface should be dry & free of dust, dirt, grease & oils. Cure time depends on temperature and humidity levels. When applying wear gloves and safety glasses.

Clean-up and Storage Instructions
TopCoat is a non-flammable liquid and does not present storage or transportation hazards. The product MUST be kept in heated storage if there is any danger of outside temperatures reaching below 40 F (5 C). For clean-up use soap & water.



Non-Ceramic TopCoat

Mixing Instructions
The product should be mechanically stirred, slowly not vigorously, for at least 15 minutes and repeatedly while using product. To avoid skimming of the product it is important to reseal the container. DO NOT THIN THIS PRODUCT.

Application Instructions
Premium Liquid Rubber Roller/Brush Grade is roller/brush applied. Allow each coat to cure 24 hours or dry to the touch before re-applying. Cure time depends on thickness, temperature and humidity levels. Surface should be dry & free of dust, dirt, grease & oils. When applying wear gloves and safety glasses. Do Not Over-Apply. Do not apply if rain is imminent (24 hrs).

Clean-up and Storage Instructions
Premium Liquid Rubber Roller/Brush Grade is a non-flammable liquid and does not present storage or transportation hazards. The product MUST be kept in heated storage if there is any danger of outside temperatures reaching below 40 F (5 C). For clean-up use mineral spits or baby oil.



Resurfacer

Mixing Instructions
The product should be mechanically stirred, slowly not vigorously, for at least 30 minutes repeatedly during use of product. To avoid skimming of the product it is important to reseal the container. DO NOT THIN THIS PRODUCT.

Application Instructions
Premium Coatings Industrial Resurfacer is applied with brush, roller or squeegee. Allow each coat to cure 24 hours or dry to the touch before re-applying. Surface should be dry & free of dust, dirt, grease & oils. Cure time depends on thickness, temperature and humidity levels. When applying wear gloves and safety glasses. Do Not Apply on Surfaces Over 100°F. Do not apply if rain is imminent (24 hrs).

Clean-up and Storage Instructions
Premium Coatings Resurfacer is a non-flammable liquid and does not present storage or transportation hazards. The product MUST be kept in heated storage if there is any danger of outside temperatures reaching below 40 F (5 C). For clean-up use water.